Download Stock Rom / Firmware for Samsung Galaxy J5 2016
|Model||SM-J510MN Binary 3 U3, S3, Bit 3|
|Region / Country / Country||Brazil / Brazil|
|Language||Multi Linguagem / Language|
|Android version||7.1.1 Nougat|
|Operator / Operator / Carrier||Clean ZTO (without logo, operator apps)|
|Build Date||15 Oct 2019|
|Security Patch Level / Security||2019-10-01 (October 1, 2019)|
|Size / Size||1.5 GB|
Attention to Rom’s Binary
Common Binary or Binary errors when installing a rom or firmware on J5 2016 SM-J510MN
SYSTEM REV. CHECK FAIL DEVICE 2 BINARY 1
SYSTEM REV. CHECK FAIL DEVICE 3 BINARY 2
SYSTEM REV. CHECK FAIL DEVICE 4 BINARY 3
SYSTEM REV. CHECK FAIL DEVICE 5 BINARY 4
SYSTEM REV. CHECK FAIL DEVICE 6 BINARY 5
SYSTEM REV. CHECK FAIL DEVICE 7 BINARY 6
SYSTEM REV. CHECK FAIL DEVICE 8 BINARY 7
DEVICE = Rom binary that is installed on your device
BINARY = Binary of the rom you are trying to install
If an error similar to the ones described above appears, it means that you are trying to install a firmware with binary lower than the firmware already installed on your device.
Look for firmware with binary equal or higher to proceed with the installation without errors.
Didn’t find the rom with your specific binary?
Use the top menu, in the “Orders” tab, enter “Samsung” make your request,
don’t forget to enter the desired model and binary.
Tutorial to install stock rom / firmware on galaxy J5 2016 SM-J510MN
Using Odin, follow these steps below.
Attention, there are 2 installation modes, with 4 and / or 5 files, or
installation with 1 file.
obs: for firmware with only 1 file, follow the same process, add only in AP / PDA
Installation for roms with 5 files via Odin
To Download current Odin or earlier versions compatible with your device< Aqui >>
Extract the firmware you just downloaded. You must obtain 5 files:
1- System & Recovery (AP)
two- BL (Bootloader)
3- CP (Modem / Radio)
4- CSC _ *** (Country / Region / Operator)
5- HOME_CSC _ *** (Country / Region / Operator)
Add each file to its respective field in Odin vx.xx.x.
Use CSC _ *** if you want to make a clean flash or
HOME_CSC _ *** if you want to keep your apps and data.
Restart your phone in Download / Odin mode with the following button combination:
POWER + VOLUME DOWN + BIXBY
Other options if the first option does not work or is not possible.
VOLUME DOWN + VOLUME UP, plug in the USB cable
POWER + VOLUME DOWN + VOLUME UP
POWER + VOLUME DOWN + HOME BUTTON (this is the most common)
Once in download mode, connect your phone to the PC, preferably using the original USB cable.
Odin must detect your device and a BLUE box will appear with the COM port number.
(Make sure that SAMSUNG DRIVERS are installed on your PC)
DO NOT check any extra boxes. The only options to be checked are F.Reset Time and Auto-Reboot.
Click on the start button, wait for Odin to say ‘PASS’ in a GREEN box. When the flash is complete, the phone will be reset and you can disconnect the phone from the PC.
* The first boot (reboot) may take a few minutes, do nothing, just wait.
For a tutorial with images, go to < Here >>
The information described above was taken from the of the file,
we are not sure if it is correct, feel free to send it to us
a correction through the comments, we appreciate your contribution.
We are not responsible
for any damage caused to the devices.
The responsibility rests entirely with the user.